Lithium battery pack welding automation

Welding Equipment Range for Cylindrical Cell Packs

Choosing a battery welding machine comes down to four decisions: output capacity (which machine model), nickel strip process (spot size and burr), power supply type (which decides the weld result), and cell size (which decides the welding stroke). Cheebo has focused on lithium battery spot welding machines for more than 20 years, so a battery spot welding machine is matched to the requirement to guarantee both output and weld quality.

Fully automatic single-sided power battery spot welding machine CBMO4-6040

Five machines, one decision

Start from the pack, not the model number

Each machine in the range performs a different function and is designed around a different kind of battery pack. Read the product introduction first, then open the product page for the published details — or contact our engineers and they will select the model for your requirement.

01 / CBMN5-6040

Standard double-sided

Double-sided welding with output up to 4,000 PCS/H, all-electric welding with no air supply required, and a 600 × 400 mm welding stroke.

02 / CBMN8-5036

Eight-axis rotating double-sided

Suited to structurally complex packs where weld quality requirements are higher.

03 / CBMO4-6040

Fully automatic single-sided

Single-sided power welding with a 135° rotating head for irregular nickel sheets, covering 18650, 21700, 26650, 26700, 32700 and 32140 cells.

04 / CBMO4-1710

Double station desktop

A desktop single-sided platform with two rotating stations, suited to smaller pack programmes that still need repeatable weld placement.

05 / CBLW-MG

Longmen fibre laser

Fibre laser welding for thicker copper and aluminium busbars.

What decides the weld

Materials, head geometry and cooling

Transistor welding power supply. The welding power supply is what gives a spot welder its welding capability: the voltage and current the weld needs are set in the power system, and the supply discharges to weld.

  • 100% consistent weld spots with zero defects and a stable current output, for high-quality welding in a short cycle
  • A closed-loop detection system welds to the set parameters and alarms automatically when the weld does not meet the requirement
  • Three welding modes — constant voltage, constant current and constant voltage/current — cover several types of nickel tab welding
  • An optional bipolar switching function removes the polarity effect in welding and leaves a clean weld spot
Eight axis rotating double-sided lithium battery welding machine CBMN8-5036

Where the eight-axis machine earns its place

A rotating welding head, plus an independent welding system built on two platforms. It can weld every type of battery pack.

Technical planning

Published figures to frame your review

Values below are taken from the supplier's product pages. Anything marked as not published should be confirmed in writing before an order.

Planning itemPublished detailWhat to confirm
Welding directionSingle-sided (CBMO4-6040, CBMO4-1710); double-sided (CBMN5-6040, CBMN8-5036, eight-axis rotating)Which face of the pack carries the tabs and whether the fixture can be flipped
Welding head135° rotating welding headNickel sheet shape and whether the joint is irregular
Cell formats listed18650 / 21700 / 26650 / 26700 / 32700 / 32140 and other steel-shell cylindrical cellsYour exact cell list and any format outside the published set
MaterialsNickel-plated steel, nickel-plated copper, pure nickelTab thickness and coating on your incoming material
Accuracy0.1 mm continuous welding accuracy with adjustable pressureWeld pitch, number of welds per pack and inspection method
Cooling and buildForced water circulation cooling; aluminium alloy frame with electrostatic coating; acrylic protective shieldsPlant water supply, floor space and operator safety provisions
Optional upgradesMES real-time production statistics; real-time pressure tracking, solder joint detection and quality monitoringWhether data must reach your MES and what the acceptance criteria are
Laser optionCBLW-MG longmen type fibre optic continuous laser welding machineWhether the joint is a resistance spot or a continuous laser seam

Where the machines fit

Pack programmes that depend on repeatable welds

The same range is reviewed against different pack programmes, provided the cell list, tab material and inspection route are settled first.

Power-tool packs

High-volume cylindrical packs where single-sided welding and a rotating head keep placement consistent across many small packs.

E-bike and light EV modules

Larger series and parallel groups where double-sided welding and a belt fixture reduce handling between welding passes.

Storage and UPS modules

Modules assembled from many cells, where the weld record and optional MES statistics matter as much as the joint itself.

The range at a glance

Open the product page for the model you need

Each entry links to the supplier's own product page, where the full published description and pictures sit.

Further reading

Articles behind the welding decisions

Cheebo's own articles explain the mechanics that sit under each choice above.

Common planning questions

Battery welding machine FAQ

Answers below stay inside what the supplier publishes. Anything else belongs in a written enquiry.

Which cell formats can these welding machines handle?

The CBMO4-6040 page lists 18650, 21700, 26650, 26700, 32700 and 32140 cylindrical cells. The CBMN8-5036 page lists 18650 and 26650. Confirm your full cell list against the chosen model before ordering.

When should I choose single-sided or double-sided welding?

Single-sided machines weld one face of the pack and rely on a rotating head for irregular nickel sheets. Double-sided machines such as CBMN8-5036 weld both faces with an eight-axis system and an automatic belt transmission fixture.

Which tab materials are listed as weldable?

The product pages describe spot welding of nickel plating on steel, nickel plating on copper and pure nickel battery tabs, in series and parallel configurations.

What welding accuracy is published?

The CBMO4-6040 and CBMN8-5036 descriptions both state 0.1 mm continuous welding accuracy, with adjustable pressure settings.

Can the equipment be upgraded with monitoring?

Yes. The supplier lists MES real-time production statistics and a real-time pressure tracking system with solder joint detection and quality monitoring as upgrade options.

How do I request a quotation?

Send the cell list, pack layout, tab material, expected output and any inspection requirement through the contact page so the configuration can be matched to your line.

Match the machine to your pack recipe

Share the cell formats, the welding direction you need, the tab material and the output target, and the range can be narrowed to one or two models before a quotation.

Cheebo Technology · 24H service hotline: 19928807536